Louvres: G Series

G Series Single Glazed Glass Louvres
Schneider Louvre G Series 


  • Aluminium profiles, single glazed up to 13.52mm
  • Louvre blades are secured in aluminium blade holders or by patch fitting
  • Louvre blade heights are sized to the opening
  • Louvres are centre pivot
  • Louvre blades are overlapping (FS option is flush)
  • Manual or Automatic Operation (24v)
  • Ideally suited to wintergarden applications (GS Series)
  • Where high performance is required please select BS or FS option below
Centre pivot
Top pivot
Single glazed
Double glazed
Triple glazed
Framed
Frameless
G12 louvre series

G Series Specifications

  • G-S

  • G-BS

  • G-FS

Construction Non-thermally broken aluminium frame
Blade Holder Aluminium
Glazing 9.52mm, 10mm or 10.76mm
Width Up to 1650mm*
Blade Height 150mm up to 300mm
Opening Angle Project dependent, up to 80°
Operation Electric drive 24VDC or Manual
Water Penetration (AS2047) Up to 150 Pa
Air Infiltration (AS2047) Suitable for use in non-airconditioned buildings (eg. Wintergardens)
Ultimate (AS2047) +8500 Pa / -7000 Pa

GENERAL INFORMATION
THE LOUVRE DESIGN CAN BE ALTERED TO SUIT ANY APPLICATION & GREATER VALUES THAN THOSE SHOWN ABOVE MAY BE ACHIEVABLE
* Depending on wind loading and glazing, greater louvre width & heights could be achieved

G12 S 

Download specification sheet

Construction Non-thermally broken aluminium frame
Blade Holder Stainless steel holder & patch fitting
Glazing 12mm to 13.52mm or 17.52mm
Width Up to 1650mm*
Blade Height 150mm up to 300mm
Opening Angle Project dependent, up to 80°
Operation Electric drive 24VDC or Manual
Water Penetration (AS2047) Up to 300 Pa
Air Infiltration (AS2047) Pass at 150 Pa (4.17 L/sm2 )
Ultimate (AS2047) +6000 Pa / -4500 Pa

GENERAL INFORMATION
THE LOUVRE DESIGN CAN BE ALTERED TO SUIT ANY APPLICATION & GREATER VALUES THAN THOSE SHOWN ABOVE MAY BE ACHIEVABLE
* Depending on wind loading and glazing, greater louvre width & heights could be achieved

G12 BS 

Download specification sheet

Construction Non-thermally broken aluminium frame
Blade Holder Stainless steel holder & patch fitting
Glazing Stepped laminate blade at 11.52mm or 13.52mm
Width Up to 1650mm*
Blade Height 300mm up to 450mm
Opening Angle Project dependent, up to 80°
Operation Electric drive 24VDC or Manual
Water Penetration (AS2047) Up to 550 Pa
Air Infiltration (AS2047) 0.24 L/sm2 at 75 Pa
Ultimate (AS2047) +7000 Pa / -5000 Pa

GENERAL INFORMATION
THE LOUVRE DESIGN CAN BE ALTERED TO SUIT ANY APPLICATION & GREATER VALUES THAN THOSE SHOWN ABOVE MAY BE ACHIEVABLE
* Depending on wind loading and glazing, greater louvre width & heights could be achieved

G12 FS 

Download specification sheet

Melbourne office

Phone
+61 3 9005 2153

Sydney office

Phone
+61 2 8004 5923

Brisbane office

Phone
1300 327 200

AWA logo